Reassembly

Reassembly

1. Install the flow control spring, the flow control valve and the connector in to the pump body.




2. Install the oil seal in the pump body by using the special tool(09222-32100).




3. Install the pump pulley.




4. Assemble the inner O-ring and the outer O-ring and install the site plate.




5. After inserting the lock pin into the groove of the front housing, install the camring attending to the direction.




6. Install the rotor.
7. Install the vanes.




8. Install the gasket and oil pump cover assembly.
9. Install the suction pipe and O-ring.